Impact Games is proud to be the official USA PDI dealer.
These parts are imported direct from PDI and are sold at Japanese retail price.
We also sell PDI wholesale. If you have a store or business and would like to sell PDI products please contact us at impactgames@aol.com.

The best parts for your VSR-10

S Piston
Light weight, easy to use piston. Uses EZY Springs.
Good for upgraded VSR-10's shooting 300-400fps.
$43.99

Hard Piston
Good for high power, 375fps or more. Uses SPR Springs.
$49.99

Vacuum Piston
Hard piston construction with a special vacuum head.
Vacuum piston head adds range when used in VSR's with 430 or 554 barrels.
Check out Ballistic to see how the Vacuum chamber works.
$62.99

Barikaru Compo Vacuum Piston
Light weight piston construction with a special vacuum head.
Light weight Delrin is self lubricating and produces high velocities with low power springs.
Not recommended above 450fps.
$65.99

1st Trigger Sear
Stronger sear for upgraded guns.
A must for upgraded VSR-10's shooting over 350fps.
$49.99

2nd Trigger Sear
Stronger Sear to hold high tension springs and pistons.
A must for upgraded VSR-10's over 350fps.
$24.99

Set Pin
Reinforced Set Pin to hold the spring guide when pulling the bolt.
$24.99

Trigger Springs
Stronger trigger springs for use with trigger sears.
$6.99

Bull Barrel Base
Thicker base for use with flute barrels
$60.99

P-Flute Barrel
Pro-Sniper Length fluted outer barrel. Heavy weight.
Click Here to see Boss Gerira holding VSR with custom anodized P-Flute Barrel by Impact/Q-Project
$81.99

L-Flute Barrel
Fluted outter barrel for 554mm 6.05 barrel. Heavy weight.
$101.99

Bull Barrel Cap
End cap for P and L Flute Barrels.
$22.99

Light Weight Barrel
Pro-Sniper length Bull Barrel
$92.99

690mm Light Weight Barrel
Bull Barrel for 554mm inner barrels.
$101.99

Conversion Adapter
use 14mm silencers or the G-Spec Silencer with your PDI outter barrel
$28.99

Silencer Adapter
14mm adapter for your Pro-Sniper or Real Shock
$12.99

Barrel Spacer
Stabilize inner barrels for G-Specs or Bull Barrels
$22.99

Straw Steel Cylinder
Steel cylinder for very high tension springs.
$89.99

Laser Cylinder
Laser welded seams for the strongest VSR-10's.
$141.99

Taper Cylinder Head
Directs air flow. Average 15fps gain just from lower turbulence.
$19.99

v-trigger
Reinforced trigger unit. Positive trigger response.
$165.99

Precision set with HD piston
All in one reinforced set.
$219.99

Precision set with VC piston
All in one reinforced set for long barrel VSR-10's.
$226.99

Precision Palsonite set with VC piston
Higher velocity and faster piston stroke from Palsonite's low friction.
Palsonite is also scratch resistant unlike teflon.
$257.99

Increased bore size for higher stroke volume and more power from your VSR-10.

Premier set with VC piston
All in one reinforced large bore set for long barrel VSR-10's.
$230.99

Premier set with VC piston and Palsonite cylinder
Laser welded Palsonite steel cylinder for the ultimate power upgrades.
$262.99

B-up Receiver
Larger body for the larger bore cylinders.
$133.99

APS Variable Hop Up Chamber
The only APS hop up that can adjust hop up at different angles.
Adjustments to correct left or right spin.
Uses 6.05 or 6.01 barrels
$67.99

APS Vacuum Piston
Vacuum Chamber allows longer range when used on EX and OR sized barrels
$62.99

APS Piston Ring
Self lubricating Delrin ring attaches to piston body.
Allows smoother piston travel.
$9.99

APS Trigger Sear
Reinforced trigger sear for upgraded APS rifles.
Milled from S45C Steel.
$39.99

APS Piston Sear
Reinforced piston sear to hold back high tension springs.
Milled from S45C Steel.
$19.99

APS Taper Cylinder Head
Tapered port allows smoother airflow and less turbulence.
$28.99

APS 9mm Spring Guide
Reinforced Spring Guide for use with 9mm PDI springs.
Made of Stainless Steel
$22.99